1. As long as the temperature and humidity of the environment reach the snow making conditions, the snow maker can start the snow making operation. The greater the amount of snow, the thicker the snow layer, and the more guaranteed the amount of snow in the ski resort when the temperature is warmer.
2、為了讓造雪機造出的雪噴射的更遠，覆蓋面積更大，盡量和風向保持一致。注意一定不能逆風造雪。這樣可能會導致造雪機的防護罩，風葉被冰雪堵塞。
2. In order to make the snow produced by the snow maker spray farther and cover more area, try to keep consistent with the wind direction. Be careful not to make snow against the wind. This may cause the snow maker's shield and wind blades to be blocked by ice and snow.
3、造雪作業時，工作人員必須穿好防護工作服。
3. During snow making operation, workers must wear protective work clothes.
4、當造雪機發生嚴重結冰情況時，應及時停止作業，排除結冰體。
4. In case of serious icing, the snow maker shall stop operation in time to remove the ice.
5、造雪機的噴射角度、擺動角度，決定雪噴射的距離，覆蓋面積的大小。
5. The spraying angle and swing angle of the snow maker determine the distance of snow spraying and the size of coverage area.
6、滑雪場內滑行頻率較高的地域需先造一層濕雪打底，然后，再在其表面覆蓋一層干雪。
6. The area with high skiing frequency in the ski resort needs to build a layer of wet snow first, and then cover the surface with a layer of dry snow.
造雪機的工作原理，基本是模仿天然雪的形成過程，首先由壓縮機產生高壓空氣送到核子發生器的噴嘴處，然后風扇負責把霧化的水霧吹到空氣中拋散，核子器在空氣和水形成一定的比例以后生成雪核，雪核在空中遇冷形成雪花。核子器是造雪機的核心技術。現代新型的造
雪機已經可以造出接近于天然雪的小顆粒狀雪花。
造雪機的工作原理是水——經過造雪機壓力霧化——冷空氣凝結——落地為雪！滑雪場規劃在制造雪的原理比較簡單，把井水抽到一個水池中，由于井水的水溫偏高，需要用高壓水泵進行揚起降溫，然后再用水泵將水抽到水管中，通過高壓水供給造雪機，造雪機再用噴射系統中的很多噴嘴把雪通過風機噴射出去。
