SIPLUS ET 200SP -40 ... +60 GRAD C Startup -25°C WITH CONFORMAL COATING BASEDON6ES7193-6AP00-0AA0 . BUSADAPTER BA 2XSCRJ, 2 SCRJ FO-ANSCHLUESSE, FOR PROFINET
ET 200SP BusAdapter “BA-Send"
BA-Send BusAdapters are used whenever an existing ET 200SP station is to be expanded with IP67 modules of the SIMATIC ET 200AL.
The SIMATIC ET 200AL is a distributed I/O device with degree of protection IP65/67 that is easy to operate and install. Due to its high degree of protection and ruggedness as well as its small dimensions and low weight, the ET 200AL is especially suitable for use at the machine and on moving plant sections. SIMATIC ET 200AL enables the user to access digital and analog signals and IO-Link data at low cost.
SIMATIC BusAdapters
In standard applications with moderate mechanical and EMC loads, SIMATIC BusAdapters with an RJ45 interface can be used, e.g. the BusAdapter BA 2xRJ45.
For machines and systems in which higher mechanical and/or EMC loads act on the devices, a SIMATIC BusAdapter with connection via FastConnect (FC) or fiber-optic cable (SCRJ or LC) is recommended. Likewise, all SIMATIC BusAdapters with a fiber-optic cable connection (SCRJ, LC) can be used with the increased loads.
BusAdapters with connections for fiber-optic cables can be used to cover high potential differences between two stations and/or high EMC loads.
An overview of the essential properties of the PN interfaces is shown in the table below
— PCF
100 m
— 塑料光纖 (POF)
50 m
— PCF-GI
250 m
— 銅導線
100 m
100 m
100 m
— 梯度型多模光纖 50/125 μm
3 km
3 km
3 km
— 梯度型多模光纖 62.5/125 μm
3 km
3 km
3 km
環境要求
運行中的環境溫度
● 最小值
0 °C
0 °C
0 °C
● 最大值
60 °C
60 °C
60 °C
尺寸
寬度
20 mm
20 mm
20 mm
20 mm
高度
69.5 mm
69.5 mm
69.5 mm
69.5 mm
深度
59 mm
59 mm
59 mm
59 mm
重量
重量，約
50 g
40 g
32 g
50 g
商品編號
6ES7193-6AS00-0AA0
一般信息
產品類型標志
BusAdapter BA-Send 1x FC
接口
PROFINET IO
導線長度
— 銅導線
15 m; IM 固件 V3.3 以上位于總線適配器 BA-Send 和第一個 ET 連接總線成員之間和其他所有總線成員之間
ET 連接
● ET 連接器接口數量
1
● FC (FastConnect)
是
環境要求
