欧美a级黄片,中文字幕精品久久久久人妻红杏1,福利久久,亚洲AV无码片一区二区三区_

The SINAMICS G120 frequency inverter is designed to provide precise and cost-effective speed/torque control of three-phase motors.

With different device versions (frame sizes FSA to FSGX) in a power range from 0.37 kW to 250 kW (0.5 hp to 400 hp), it is suitable for a wide variety of drive solutions.

Example: SINAMICS G120, frame sizes FSA, FSB and FSC; each with Power Module, CU240E‑2 F Control Unit and Basic Operator Panel BOP-2

Example: SINAMICS G120, frame sizes FSD, FSE and FSF; each with Power Module, CU240E‑2 F Control Unit and Inbligent Operator Panel IOP

Example: SINAMICS G120, frame size FSGX; with Power Module, CU240E‑2 F Control Unit and Basic Operator Panel BOP-2

Operator-friendly design

SINAMICS G120 is a modular inverter system that essentially comprises two function units:

• Control Unit (CU)
• Power Module (PM)

The Control Unit controls and monitors the Power Module and the connected motor using several different closed-loop control types that can be selected. It supports communication with a local or central controller and monitoring devices.

The Power Module supplies the motor in the power range 0.37 kW to 250 kW (0.5 hp to 400 hp). It features state-of-the-art IGBT technology with pulse-b-modulated motor voltage and selectable pulse frequency. Comprehensive protection functions provide a high degree of protection for the Power Module and the motor.

The Control Units can be combined with the following Power Modules:

Control Units	Power Modules degree of protection IP20
	PM230 1)	PM240‑2	PM240	PM250
CU230P‑2	✓	✓	✓	✓
CU240B‑2	✓	✓	✓	✓
CU240E‑2	✓	✓	✓	✓
CU250S‑2	–	✓	✓	✓

¹⁾ PM230 Power Modules with integrated filter class A or class B, degree of protection IP55/UL Type 12, 0.37 kW to 90 kW (0.5 to 125 hp) are integral components of the SINAMICS G120P for pumps, fans and compressors. The CU230P‑2 is the Control Unit for SINAMICS G120P and SINAMICS G120P Cabinet for pumps, fans and compressors.More inbation can be found in Catalog D 35.

Safety Integrated

SINAMICS G120 standard inverters are available in different versions for safety-related applications. The PM240‑2 und PM250 Power Modules are already designed for Safety Integrated. PM240 Power Modules, frame size FSGX (i.e. 160 kW/250 hp and higher) are approved only for the Basic Safety functions (STO, SS1, and SBC). A drive can be combined with a Control Unit with safety functions (see overview) in order to create a Safety Integrated drive. The availability of Safety Integrated functions depends on the type of Control Unit.

Control Unit	Basic Safety functions			Extended Safety functions
	STO	SS1	SBC 1)	SLS	SDI	SSM
CU230P‑2	–	–	–	–	–	–
CU240B‑2	–	–	–	–	–	–
CU240E‑2	✓	–	–	–	–	–
CU240E‑2 F	✓	✓	–	✓	✓	✓ 2)
CU250S‑2	✓	✓	✓	✓ 3)	✓ 3)	✓ 3)

¹⁾ The SBC function can be utilized only if a Safe Brake Relay is installed.

²⁾ SSM possible only for CU240E‑2 DP‑F / CU240E‑2 PN‑F Control Units with PROFIsafe.

³⁾ With license for Extended Safety functions.

Basic Safety functions (certified according to IEC 61508 SIL 2, and EN ISO 13849‑1 PL d and Category 3)

• Safe Torque Off (STO)
  to protect against active movement of the drive
• The PM240‑2 Power Modules, frame sizes FSD to FSF additionally offer STO acc. to IEC 61508 SIL 3 and EN ISO 13489‑1 PL e and Category 3.
• Safe Stop 1 (SS1)
  for continuous monitoring of a safe braking ramp
• Safe Brake Control (SBC) is used to safely control a holding
  brake. When enabled, SBC is always activated at the same time as STO. The Safe Brake Relay is used for SBC.

Extended Safety functions (certified according to IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3)

• Safely Limited Speed (SLS)
  for protection against dangerous movements on exceeding a speed limit
• Safe Direction (SDI)
  This function ensures that the drive can only rotate in the selected direction.
• Safe Speed Monitoring (SSM)
  This function signals if a drive operates below a specific speed/feed velocity.

Basic Safety and Extended Safety functions can be activated via PROFIsafe or by means of the safety bs.

None of the safety functions require a motor encoder and they are thus cheaper and easier to implement. Existing systems in particular can be simply updated with safety technology without the need to change the motor or mechanical system.

The Safe Torque Off (STO) function can be used without restriction for all applications. The SS1, SLS, SSM and SDI functions are only permissible for applications where the load can never accelerate when the inverter is switched off. They are therefore not permitted for applications involving pull-through loads such as hoisting gear and unwinders.

Additional inbation is provided in chapter Highlights, section Safety Integrated.

Efficient Infeed Technology

The innovative Efficient Infeed Technology is employed in PM250 Power Modules. This technology allows the energy produced by motors operating in generator mode connected to standard inverters to be fed back into the supply system. For control cabinets, an additional temperature rise can be avoided and the amount of space required can be reduced due to the fact that components such as braking resistors, braking choppers and line reactors can be eliminated. Further, wiring and engineering costs are significantly reduced. At the same time, energy consumption can be reduced and ongoing operating costs noticeably reduced.

Additional inbation is provided in chapter Highlights, section Efficient Infeed Technology.

Innovative cooling concept and varnishing of electronic modules

The new cooling system and varnishing of the electronic modules significantly increases the service life or useful life of the device.

• Disposal of all heat losses via an external heat sink
• Consequential convection cooling of the Control Unit, electronic modules are not located in the air duct
• All cooling air from the fan is directed through the heat sink

Energy efficiency

Integrated technologies help when optimizing the energy usage of the plant or system referred to the particular application:

• Energy-efficient vector control with or without sensors
• Automatic flux reduction with V/f ECO mode
• Integrated energy saving computer

Additional inbation is provided in chapter Highlights, section Energy efficiency.

• Modularity ensures flexibility for a drive concept that is fit for the future
  • Control Unit can be hot-swapped
  • Pluggable terminals
  • The modules can be easily replaced, which makes the system extremely service friendly
• The integrated safety functions significantly reduce the costs when integrating drives into safety-oriented machines or systems
• Communications-capable via PROFINET or PROFIBUS with PROFIdrive Profile 4.0
  • Plant-wide engineering
  • Easy to handle
• The innovative circuit design (bidirectional b rectifier with "pared-down" DC b) allows the kinetic energy of a load to be fed back into the supply system when PM250 Power Modules are used. This feedback capability provides enormous potential for savings because generated energy no longer has to be converted into heat in a braking resistor
• Integrated USB interface for simplified, local commissioning and diagnostics
• Application-specific functions for pumps, fans and compressors
  Integrated are, e.g.:
  • 4 freely-programmable PID controllers
  • Application-specific wizards
  • Pt1000/LG-Ni1000 temperature sensor interface
  • 230 V AC relay
  • 3 freely-programmable digital time switches
• With CU250S‑2 Control Units: Integrated bing functionality (basic ber EPos) supports process-related implementation of bing tasks with a high dynamic response. Positioning can be implemented with an incremental and/or absolute encoder (SSI)
• With CU250S‑2 Control Units: Encoder interfaces DRIVE‑CLiQ, HTL/TTL/SSI (SUB‑D) and resolver/HTL (terminal)
• With CU250S‑2 Control Units: Vector control with or without sensors
• Integrated control functionality by using BICO technology
• An innovative cooling concept and coated electronic modules increase robustness and service life
  • External heat sink
  • Electronic components are not located in air duct
  • Control Unit that is compleby cooled by convection
  • Additional coating of the most important components
• Simple unit replacement and quick copying of beters using an optional Operator Panel or an optional memory card
• Quiet motor operation as a result of the high pulse frequency
• Compact, space-saving design
• Software beters for simple adaptation to 50 Hz or 60 Hz motors (IEC or NEMA motors)
• 2/3-wire control for static/pulsed signals for universal control via digital bs
• Fast engineering and commissioning by using standard engineering tools such as SIZER for Siemens Drives, STARTER, SINAMICS Startdrive, and Drive ES – STARTER is integrated into STEP 7 using Drive ES Basic, with all of the benefits of central data management and totally integrated communication
• Certified worldwide for compliance with CE, UL, cUL, C-Tick (RCM) and Safety Integrated according to IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3
• The PM240‑2 Power Modules, frame sizes FSD to FSF additionally offer STO acc. to IEC 61508 SIL 3 and EN ISO 13489‑1 PL e and Category 3.

Application-orientated design of SINAMICS G120

SINAMICS G120 standard inverters are modular inverters for standard drives. Selection of the SINAMICS G120 is reduced to two or three steps thanks to the modular system used.

Selecting the Control Unit

The optimum Control Unit is selected first, based on the number of I/Os and any additional functions required such as Safety Integrated or HVAC. The communication options are already integrated and do not have to be additionally ordered or plugged in. Three product series are available corresponding to the particular application.

CU230P‑2 Control Units

The CU230P‑2 Control Units have been specifically designed for pump, fan and compressor applications.
The CU230P‑2 is the Control Unit for the pump, fan and compressor inverters SINAMICS G120P and SINAMICS G120P Cabinet. More inbation can be found in Catalog D 35.

CU240B‑2 and CU240E‑2 Control Units

The CU240B‑2 and CU240E‑2 Control Units are suitable for a wide range of applications in general machine construction, such as conveyor belts, mixers and extruders.

CU250S‑2 Control Units

The CU250S‑2 Control Units are suitable for applications involving single drives with exacting speed control requirements such as extruders and centrifuges, and for bing tasks such as conveyor belts, lifting/lowering devices, etc. They can also be used to implement multi-motor drives without DC coupling such as wire-drawing machines and simple material lines.

 

Debion	Fieldbus	Profile	Inputs Outputs	Integrated safety technology	Fail-safe digital bs digital outputs	Control Unit
						Article No.
CU230P‑2 series - the specialist for pumps, fans, compressors, water, buildings Technology functions (selection): Free function locks (FFB), 4 × PID controller, cascade connection, hibernation mode, essential service mode, multi-zone control
CU230P‑2 HVAC	USS Modbus RTU BACnet MS/TP FLN P1 protocol	–	6 DI 4 AI 3 DO 2 AO	–	–	6SL3243-0BB30-1HA3
CU230P‑2 DP	PROFIBUS DP	PROFIdrive				6SL3243-0BB30-1PA3
CU230P‑2 PN	PROFINET	PROFIdrive PROFIenergy				6SL3243-0BB30-1FA0
	EtherNet/IP ODVA AC drive SINAMICS profile	–
CU240B‑2 series – for basic applications with variable-speed drives – without encoder Technology functions (selection): Free function blocks (FFB), 1 × PID controller, motor holding brake
CU240B‑2	USS Modbus RTU	–	4 DI 1 AI 1 DO 1 AO	–	–	6SL3244-0BB00-1BA1
CU240B‑2 DP	PROFIBUS DP	PROFIdrive				6SL3244-0BB00-1PA1
CU240E‑2 series – for standard applications in general machinery construction, such as conveyor belts, mixers and extruders – without encoder Technology functions (selection): Free function blocks (FFB), 1 × PID controller, motor holding brake
CU240E‑2	USS Modbus RTU	–	6 DI 2 AI 3 DO 2 AO	STO	1 F-DI (opt. for each 2 DI)	6SL3244-0BB12-1BA1
CU240E‑2 DP	PROFIBUS DP	PROFIdrive PROFIsafe				6SL3244-0BB12-1PA1
CU240E‑2 PN	PROFINET	PROFIdrive PROFIsafe PROFIenergy				6SL3244-0BB12-1FA0
	EtherNet/IP ODVA AC drive SINAMICS profile	–
CU240E‑2 F	USS Modbus RTU	–		STO, SS1, SLS, SDI	3 F-DI (opt. for each 2 DI)	6SL3244-0BB13-1BA1
CU240E‑2 DP‑F	PROFIBUS DP	PROFIdrive PROFIsafe		STO, SS1, SLS, SSM 1), SDI		6SL3244-0BB13-1PA1
CU240E‑2 PN‑F	PROFINET	PROFIdrive PROFIsafe PROFIenergy				6SL3244-0BB13-1FA0
	EtherNet/IP ODVA AC drive SINAMICS profile	–
CU250S‑2 series – for complex applications such as extruders and centrifuges – with and without encoder (basic ber (EPos) optional) Technology functions (selection): Free function blocks (FFB), 1 × PID controller, motor holding brake
CU250S‑2	USS Modbus RTU	–	11 DI 2 AI 3 DO 2 AO 4 DI/DO (DI can be used as high-speed bs)	STO, SBC, SS1	3 F-DI (opt. for each 2 DI) 1 F-DO (opt. for each 2 DO)	6SL3246-0BA22-1BA0
CU250S‑2 DP	PROFIBUS DP	PROFIdrive PROFIsafe				6SL3246-0BA22-1PA0
CU250S‑2 PN	PROFINET	PROFIdrive PROFIsafe PROFIenergy				6SL3246-0BA22-1FA0
	EtherNet/IP ODVA AC drive SINAMICS profile	–
CU250S‑2 CAN	CANopen	–				6SL3246-0BA22-1CA0

¹⁾ SSM is possible only with PROFIsafe.

Optional memory card with firmware V4.7 SP6 HF1 for CU230P‑2, CU240B‑2, CU240E‑2 and CU250S‑2 Control Units

Debion	Suitable for	Article No.
SINAMICS SD card 512 MB + firmware V4.7 SP6 HF1 (Multicard V4.7 SP6 HF1)	CU230P‑2 CU240B‑2 CU240E‑2 CU250S‑2	6SL3054-7TD00-2BA0

Optional memory cards with licenses for CU250S‑2 Control Units only

Debion	SINAMICS SD card 512 MB + licenses	SINAMICS SD card 512 MB + firmware V4.7SP6 HF1 (Multicard V4.7 SP6 HF1) + licenses	Licenses (without SD card) for upgrading license  of an existing SD card
	Article No.	Article No.	Article No.
License Extended Functions  Basic ber (EPos)	6SL3054-4AG00-2AA0-Z E01	6SL3054-7TD00-2BA0-Z E01	6SL3074-7AA04-0AA0
License Extended Functions  Safety (SLS, SSM, SDI)	6SL3054-4AG00-2AA0-Z F01	6SL3054-7TD00-2BA0-Z F01	6SL3074-0AA10-0AA0
Licenses Extended Functions  Basic ber (EPos) +Safety (SLS, SSM, SDI)	6SL3054-4AG00-2AA0-Z E01+F01	6SL3054-7TD00-2BA0-Z E01+F01	–

Additional inbation on firmware V4.7 SP6 HF1:

https://support.industry.siemens.com/cs/document/109482094

Optional memory cards with firmware V4.6 or V4.7 for existing installations when service is required

Debion	Suitable for	Article No.
SINAMICS SD card 512 MB + firmware V4.6 (Multicard V4.6)	CU230P‑2 CU240B‑2 CU240E‑2 CU250S‑2	6SL3054-7EG00-2BA0
SINAMICS SD card 512 MB + firmware V4.7 (Multicard V4.7)	CU230P‑2 CU240B‑2 CU240E‑2 CU250S‑2	6SL3054-7EH00-2BA0

For more inbation on firmware V4.6:

https://support.industry.siemens.com/cs/document/67385235

For more inbation on firmware V4.7:

https://support.industry.siemens.com/cs/document/92554110

Selecting the Power Module

The optimum power unit can be quickly selected based on the required motor power, the supply voltage and the braking cycles to be expected. Power Modules in degree of protection IP20 are intended for installation in a control cabinet.

PM230 Power Modules – degree of protection IP20

PM230 Power Modules are designed for applications involving pumps, fans and compressors with a square characteristic. They do not have an integrated braking chopper (single-quadrant applications).

PM230 Power Modules with integrated filter class A or class B, degree of protection IP55/UL Type 12, 0.37 kW to 90 kW (0.5 to 125 hp) are integral components of the SINAMICS G120P for pumps, fans and compressors. More inbation can be found in Catalog D 35.

PM240‑2 and PM240 Power Modules – IP20 degree of protection

PM240‑2 Power Modules have an integrated braking chopper (four-quadrant applications) and are suitable for a large number of applications in general machinery construction. The same applies for PM240 Power Modules, but the PM240 Power Modules in frame size FSGX do not have an integrated braking chopper. A plug-in Braking Module is optionally available for this purpose.

PM250 Power Modules – degree of protection IP20

PM250 Power Modules are suitable for the same applications as the PM240‑2/PM240. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking resistor is not required).

The Power Modules can be combined with the following Control Units:

Control Units	Power Modules degree of protection IP20
	PM230 1)	PM240‑2/PM240	PM250
CU230P‑2	✓	✓	✓
CU240B‑2	✓	✓	✓
CU240E‑2	✓	✓	✓
CU250S‑2	–	✓	✓

¹⁾ PM230 Power Modules with integrated filter class A or class B, degree of protection IP55/UL Type 12, 0.37 kW to 90 kW (0.5 to 125 hp) are integral components of the SINAMICS G120P for pumps, fans and compressors. The CU230P‑2 is the Control Unit for SINAMICS G120P and SINAMICS G120P Cabinet for pumps, fans and compressors.More inbation can be found in Catalog D 35.

 

PM230, PM240 and PM240‑2 Power Modules

Rated power 1)		Rated output currentIrated2)	PM230 Power Module Degree of protection IP20 3) The following Control Units are supported: CU230P‑2 ..., CU240B‑2 ..., CU240E‑2 ...		PM240‑2 Power Modules 4) Degree of protection IP20 All CUs pluggable
kW	hp	A	Article No.		Article No.
200 ... 240 V 1 AC/3 AC
0.55	0.75	3.2	–		6SL3210-1PB13-0❒L0
0.75	1	4.2	–		6SL321❒-1PB13-8❒L0
1.1	1.5	6	–		6SL3210-1PB15-5❒L0
1.5	2	7.4	–		6SL3210-1PB17-4❒L0
2.2	3	10.4	–		6SL321❒-1PB21-0❒L0
3	4	13.6	–		6SL3210-1PB21-4❒L0
4	5	17.5	–		6SL321❒-1PB21-8❒L0
200 ... 240 V 3 AC
5.5	7.5	22	–		6SL3210-1PC22-2❒L0
7.5	10	28	–		6SL3210-1PC22-8❒L0
11	15	42	–	NEW	6SL3210-1PC24-2UL0
15	20	54	–	NEW	6SL3210-1PC25-4UL0
18.5	25	68	–	NEW	6SL3210-1PC26-8UL0
22	30	80	–	NEW	6SL3210-1PC28-0UL0
30	40	104	–	NEW	6SL3210-1PC31-1UL0
37	50	130	–	NEW	6SL3210-1PC31-3UL0
45	60	154	–	NEW	6SL3210-1PC31-6UL0
55	75	178	–	NEW	6SL3210-1PC31-8UL0
380 ... 480 V 3 AC
0.37 5)	0.5	1.3	6SL3210-1NE11-3❒L1		– 5)
0.55	0.75	1.7	6SL3210-1NE11-7❒L1		6SL3210-1PE11-8❒L1
0.75	1	2.2	6SL3210-1NE12-2❒L1		6SL3210-1PE12-3❒L1
1.1	1.5	3.1	6SL3210-1NE13-1❒L1		6SL3210-1PE13-2❒L1
1.5	2	4.1	6SL3210-1NE14-1❒L1		6SL3210-1PE14-3❒L1
2.2	3	5.9	6SL3210-1NE15-8❒L1		6SL3210-1PE16-1❒L1
3	4	7.7	6SL321❒-1NE17-7❒L1		6SL321❒-1PE18-0❒L1
4	5	10.2	6SL3210-1NE21-0❒L1		6SL3210-1PE21-1❒L0
5.5	7.5	13.2	6SL3210-1NE21-3❒L1		6SL3210-1PE21-4❒L0
7.5	10	18	6SL321❒-1NE21-8❒L1		6SL321❒-1PE21-8❒L0
11	15	26	6SL3210-1NE22-6❒L1		6SL3210-1PE22-7❒L0
15	20	32	6SL3210-1NE23-2❒L1		6SL321❒-1PE23-3❒L0
18.5	25	38	6SL321❒-1NE23-8❒L1	NEW	6SL3210-1PE23-8❒L0
22	30	45	6SL3210-1NE24-5❒L0	NEW	6SL3210-1PE24-5❒L0
30	40	60	6SL3210-1NE26-0❒L0	NEW	6SL3210-1PE26-0❒L0
37	50	75	6SL3210-1NE27-5❒L0	NEW	6SL3210-1PE27-5❒L0
45	60	90	6SL3210-1NE28-8❒L0	NEW	6SL3210-1PE28-8❒L0
55	75	110	6SL3210-1NE31-1❒L0	NEW	6SL3210-1PE31-1❒L0
75	100	145	6SL3210-1NE31-5❒L0	NEW	6SL3210-1PE31-5❒L0
90	125	178	–	NEW	6SL3210-1PE31-8❒L0
110	150	205	–	NEW	6SL3210-1PE32-1❒L0
132	200	250	–	NEW	6SL3210-1PE32-5❒L0
160	250	302	–	4)	6SL3224-0XE41-3UA0
200	300	370	–	4)	6SL3224-0XE41-6UA0
250	400	477	–	4)	6SL3224-0XE42-0UA0
500 ... 690 V 3 AC
11	10	14	–	NEW	6SL3210-1PH21-4❒L0
15	15	19	–	NEW	6SL3210-1PH22-0❒L0
18.5	20	23	–	NEW	6SL3210-1PH22-3❒L0
22	25	27	–	NEW	6SL3210-1PH22-7❒L0
30	30	35	–	NEW	6SL3210-1PH23-5❒L0
37	40	42	–	NEW	6SL3210-1PH24-2❒L0
45	50	52	–	NEW	6SL3210-1PH25-2❒L0
55	60	62	–	NEW	6SL3210-1PH26-2❒L0
75	75	80	–	NEW	6SL3210-1PH28-0❒L0
90	100	100	–	NEW	6SL3210-1PH31-0❒L0
110	100	115	–	NEW	6SL3210-1PH31-2❒L0
132	125	142	–	NEW	6SL3210-1PH31-4❒L0
Heat sink variant			↑		↑
Standard			0		0
Push-through			1		1
Integrated line filter			↑		↑
Without	(for IT systems)		U		U
Class A	(for TN systems)		A		A

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO). Low overload (LO) generally applies for applications with low dynamic response (continuous operation), quadratic torque characteristic with low break loose torque and low speed accuracy. Examples: Centrifugal pumps, radial/axial fans, rotary piston fans, radial compressors, vacuum pumps, chain conveyors, agitators. High Overload (HO) generally applies for applications with increased dynamic response (cyclic operation) and constant torque characteristics with high break loose torque. Examples: Gear pumps, eccentric worm pumps, mills, mixers, crushers, lifting/lowering gear, centrifuges.

²⁾ The rated output current I_rated is based on the duty cycle for low overload (LO). These current values are applicable for 200 V, 400 V or 690 V.

³⁾ PM230 Power Modules with integrated filter class A or class B, degree of protection IP55/UL Type 12, 0.37 kW to 90 kW (0.5 to 125 hp) are integral components of the SINAMICS G120P for pumps, fans and compressors. The CU230P‑2 is the Control Unit for SINAMICS G120P and SINAMICS G120P Cabinet for pumps, fans and compressors.More inbation can be found in Catalog D 35.

⁴⁾ 160 kW ... 250 kW (250 to 400 hp), PM240 Power Modules (frame size FSGX).

⁵⁾ The PM240‑2 Power Module with Article No. 6SL3210-1PE11-8. L1 corresponds to 0.37 kW (0.5 hp) with duty cycle HO.

Data based on a duty cycle with low overload (LO). Data based on duty cycle with high overload (HO), see section Power Modules.

PM250 Power Modules

Rated power 1)		Rated output currentIrated2)	PM250 Power Module  Degree of protection IP20 All CUs pluggable
kW	hp	A	Article No.
380 ... 480 V 3 AC
7.5	10	18	6SL3225-0BE25-5AA1
11	15	25	6SL3225-0BE27-5AA1
15	20	32	6SL3225-0BE31-1AA1
18.5	25	38	6SL3225-0BE31-5❒A0
22	30	45	6SL3225-0BE31-8❒A0
30	40	60	6SL3225-0BE32-2❒A0
37	50	75	6SL3225-0BE33-0❒A0
45	60	90	6SL3225-0BE33-7❒A0
55	75	110	6SL3225-0BE34-5❒A0
75	100	145	6SL3225-0BE35-5❒A0
90	125	178	6SL3225-0BE37-5❒A0
Integrated line filter			↑
Without	(for IT systems)		U
Class A	(for TN systems)		A
Class B	(for TN systems)		Integrated line filter not available, as external option only

¹⁾ Rated power based on the rated output current I_rated. The rated output current I_rated is based on the duty cycle for low overload (LO). Low overload (LO) generally applies for applications with low dynamic response (continuous operation), quadratic torque characteristic with low break loose torque and low speed accuracy. Examples: Centrifugal pumps, radial/axial fans, rotary piston fans, radial compressors, vacuum pumps, chain conveyors, agitators. High Overload (HO) generally applies for applications with increased dynamic response (cyclic operation) and constant torque characteristics with high break loose torque. Examples: Gear pumps, eccentric worm pumps, mills, mixers, crushers, lifting/lowering gear, centrifuges.

²⁾ The rated output current I_rated is based on the duty cycle for low overload (LO). These current values are applicable for 400 V.

Data based on a duty cycle with low overload (LO). Data based on duty cycle with high overload (HO), see section Power Modules.

Selecting optional system components

Inbligent Operator Panel IOP

Graphic display with bar-type diagrams, e.g. for status values such as pressure or flowrate.

User-friendly commissioning, diagnostics and local operator control using a large plain text display, b menu navigation and application wizards.

Inbligent Operator Panel IOP Handheld

A handheld version of the IOP can be ordered for mobile use. In addition to the IOP, this includes a housing with rechargeable batteries, charging unit and RS232 connecting cable.

Basic Operator Panel BOP-2

Menu navigation and 2-line display permit fast and user-friendly commissioning of the inverter.

Simple basic commissioning by simultaneously displaying beter and beter value, as well as the option of filtering beters.

Door mounting kit for IOP/BOP‑2

Using the optionally available door mounting kit, the IOP/BOP‑2 can be mounted in a control cabinet door with just a few manual operations (IP54/UL Type 12 degree of protection is achieved).

Push-through mounting frame for push-through variants of the PM230 and PM240-2 Power Modules

It is advisable to use an optionally available mounting frame to install the push-through unit in a control cabinet. This mounting frame includes the necessary seals and frame to ensure compliance with degree of protection IP54. If the Power Module is installed without use of the optional mounting frame, the user is responsible for ensuring that the requisite degree of protection is provided. The kit contains all the necessary nuts and seals.

Memory card

The beter settings for an inverter can be stored on the SINAMICS SD card. When service is required, e.g. after the inverter has been replaced, the drive system is immediaby ready for use again. The memory card can also be used to upgrade the firmware of the Control Unit.

Brake Relay

The Brake Relay allows the Power Module to be connected to an electromechanical motor brake, thereby allowing the motor brake to be driven directly by the Control Unit.

Safe Brake Relay

The Safe Brake Relay allows the Power Module to be safely connected to an electromechanical motor brake, allowing the brake to be directly and safely controlled from the CU250S‑2 Control Unit in accordance with IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3.

PC inverter connection kit 2

For controlling and commissioning an inverter directly from a PC if the appropriate software (STARTER commissioning tool or SINAMICS Startdrive) has been installed.

Shield connection kit for Power Modules

The shield connection kit makes it easier to connect the shields of supply and control cables, provides mechanical strain relief and thus ensures optimum EMC perbance. The shield connection kit is included in the scope of supply of the PM230 Power Modules, frame sizes FSA to FSC, and the PM240‑2 Power Modules, frame sizes FSA to FSF.

Shield connection kit for Control Units

The shield connection kit offers optimum shield connection and strain relief for all signal and communication cables. It includes a matching shield bonding plate and all of the necessary connecting and retaining elements for mounting.

Debion		Article No.
Inbligent Operator Panel IOP
German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish		6SL3255-0AA00-4JA1
Chinese (simplified), English, German	NEW	6SL3255-0AA00-4JC1
Operator Panel IOP Handheld		6SL3255-0AA00-4HA0
Operator Panel BOP‑2		6SL3255-0AA00-4CA1
Door mounting kit for IOP/BOP‑2		6SL3256-0AP00-0JA0
Push-through mounting frame
For PM230 and PM240‑2 Power Modules, degree of protection IP20 – push-through variants
Frame size FSA		6SL3260-6AA00-0DA0
Frame size FSB		6SL3260-6AB00-0DA0
Frame size FSC		6SL3260-6AC00-0DA0
Memory card
SINAMICS SD card 1) 512 MB		6SL3054-4AG00-2AA0
Brake Relay		6SL3252-0BB00-0AA0
Safe Brake Relay		6SL3252-0BB01-0AA0
PC inverter connection kit 2		6SL3255-0AA00-2CA0
Shield plates
For PM230 Power Modules in degree of protection IP20, standard and push-through variants
Frame sizes FSA to FSC		Supplied with the Power Modules, available as a spare part
Shield connection kits
For PM230 Power Module in degree of protection IP20
Frame sizes FSD and FSE		6SL3262-1AD00-0DA0
Frame size FSF		6SL3262-1AF00-0DA0
For PM240‑2 Power Modules
Frame sizes FSA to FSF		Supplied with the Power Modules, available as a spare part
For PM250 Power Modules
Frame size FSC		6SL3262-1AC00-0DA0
Frame sizes FSD and FSE		6SL3262-1AD00-0DA0
Frame size FSF		6SL3262-1AF00-0DA0
For Control Units
For CU230P‑2 HVAC and CU230P‑2 DP		6SL3264-1EA00-0FA0
For CU240B‑2 and CU240E‑2		6SL3264-1EA00-0HA0
For CU230P‑2 PN, CU240E‑2 PN and CU240E‑2 PN‑F		6SL3264-1EA00-0HB0
For CU250S‑2		6SL3264-1EA00-0LA0
STARTER commissioning tool 2) on DVD‑ROM		6SL3072-0AA00-0AG0
SINAMICS Startdrive commissioning tool 3) on DVD‑ROM		6SL3072-4DA02-0XG0

¹⁾ Approved only for CU230P‑2 HVAC and CU230P‑2 DP Control Units with firmware version V4.6 and higher.

²⁾ The STARTER commissioning tool is also available on the Internet at http://www.siemens.com/starter

³⁾ The SINAMICS Startdrive commissioning tool is also available on Internet athttps://support.industry.siemens.com/cs/document/68034568

Line-side power components

The following line-side power components are available for SINAMICS G120 standard inverters:

Line filters

With one of the additional line filters, the Power Module reaches a higher radio interference class.

Line reactors
(only for PM240‑2 Power Modules, frame sizes FSA to FSC, and PM240 FSGX)

Line reactors smooth the current drawn by the inverter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-b capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the inverter.

Note:

A DC b reactor is integrated in the PM240‑2 Power Modules FSD to FSF and therefore no line reactor is required.

Recommended line-side power components

Furthermore, this is a recommendation for additional line-side components, such as fuses and circuit breakers (line-side components must be dimensioned in accordance with IEC standards).

Additional inbation about the line-side power components can be found in Catalogs LV 10, IC 10 and IC 10 AO as well as the Industry Mall.

DC b components

The following DC b components are available for the SINAMICS G120 standard inverters:

Braking resistors
(for PM240 and PM240‑2 Power Modules only)

Excess energy in the DC b is dissipated in the braking resistor. The braking resistors are designed for use with PM240 and PM240‑2 Power Modules. They are equipped with an integrated braking chopper (electronic switch). There is an optional plug-in Braking Module for frame size FSGX.

Braking Module
(for PM240 Power Modules, frame size FSGX only)

A Braking Module and the matching external braking resistor are required to bring drives with a PM240 Power Module, frame size FSGX, to a controlled standstill in the event of a power failure (e.g. emergency retrb or EMERGENCY STOP Category 1) or to limit the DC b voltage during a short period of generator operation. The Braking Module includes the power electronics and the associated control circuit.

Load-side power components

The following load-side power components are available for the SINAMICS G120 standard inverters. This means that during operation with output reactors or sine-wave filters, longer, shielded motor cables are possible and the motor service life can be extended:

Output reactors
(not for PM240-2 Power Modules, frame sizes FSD to FSF, as these have an integrated DC b reactor)

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Sine-wave filter
(not available for PM230 and PM240‑2 Power Modules)

Sine-wave filters limit the rate of voltage rise (dv/dt) and the peak voltages on the motor winding. Similar to an output reactor, they enable the connection of longer motor cables.

Additional options

Further selected supplementary products are available from Siemens Partners. 
Please select “Drive Options” as the technology in the "Solution Partner Finder” :
http://www.siemens.com/automation/partnerfinder

Spare parts

Spare Parts Kit for Control Units

The Spare Parts Kit contains small parts for all variants of the following SINAMICS G120 Control Units:

• CU230P‑2
• CU240B‑2
• CU240E‑2
• CU240E‑2 F
• CU250S‑2

Shield connection kits for PM240‑2 Power Modules

A shield connection kit is supplied as standard with PM240‑2 Power Modules in frame sizes FSA to FSF. This shield connection kit is also available as a spare part.

Shield plates for PM230 Power Modules

PM230 Power Modules in degree of protection IP20, frame sizes FSA to FSC, are supplied with a shield plate for motor and signal cables. This shield plate is also available as a spare part.

Replacement door for PM240 Power Modules, frame size FSGX

A complete replacement door can be ordered for the PM240 Power Module, frame size FSGX.

Terminal cover kits for frame sizes FSD to FSF

The terminal cover kit includes a replacement cover for the connecting terminals. Terminal cover kits, which are suitable for the Power Modules PM230 in degree of protection IP20, standard version, PM240‑2, and PM250 are available.

Replacement connectors for PM240‑2 Power Modules

A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the PM240‑2 Power Module.

Fan units for PM230 and PM240‑2 Power Modules

The fans of PM230 and PM240-2 Power Modules are designed for extra long service life. For special requirements, replacement fans are available that can be exchanged quickly and easily.

Replacement fans for PM240 and PM250 Power Modules

The fans of PM240 and PM250 Power Modules are designed for extra long service life. Replacement fans can be ordered for special applications.

The following electronic configuring aids and engineering tools are available for the SINAMICS G120 standard inverters:

Drive Technology Configurator (DT Configurator) within the CA 01

The interactive catalog CA 01 – the offline Industry Mall of Siemens on DVD‑ROM – contains over 100 000 products with approximaby 5 million possible drive system product variants. The Drive Technology Configurator (DT Configurator) has been developed to facilitate selection of the correct motor and/or inverter from the wide spectrum of drives. It is integrated in Catalog CA 01 as an add-on on DVD‑ROM.

Online DT Configurator

In addition, the DT Configurator can be used on the Internet without requiring any installation. The DT Configurator can be found in the Siemens Industry Mall at the following address: 
http://www.siemens.com/dt-configurator

SIZER for Siemens Drives engineering tool

The SIZER for Siemens Drives engineering tool makes it easy to engineer the SINAMICS drive family. It provides support when selecting the hardware and firmware components necessary to implement a drive task. SIZER for Siemens Drives is designed to support configuring of the entire drive system.

You can find further inbation on the SIZER for Siemens Drives engineering tool in the chapter Engineering tools.

The SIZER for Siemens Drives engineering tool is available free on the Internet at 
http://www.siemens.com/sizer

STARTER commissioning tool

The STARTER commissioning tool allows menu-bed commissioning, optimization and diagnostics. Apart from the SINAMICS drives, STARTER is also suitable for MICROMASTER 4 devices.

You can find further inbation about the STARTER commissioning tool in the chapter Engineering tools.

Additional inbation about the STARTER commissioning tool is available on the Internet at 
http://www.siemens.com/starter

SINAMICS Startdrive commissioning tool

SINAMICS Startdrive is a tool for configuring, commissioning, and diagnosing the SINAMICS family of drives and is integrated into the TIA Portal. SINAMICS Startdrive can be used to implement drive tasks with the SINAMICS G110M, SINAMICS G120, SINAMICS G120C, SINAMICS G120D and SINAMICS G120P inverter series. The commissioning tool has been optimized with regard to user friendliness and consistent use of the TIA Portal benefits of a common working environment for PLC, HMI and drives.

You can find further inbation on the SINAMICS Startdrive commissioning tool in the chapter Engineering tools.

The SINAMICS Startdrive commissioning tool is available free on the Internet at 
http://www.siemens.com/startdrive

Drive ES engineering system

Drive ES is the engineering system that can be used to integrate the communication, configuration and data management functions of Siemens drive technology into the SIMATIC automation world easily, efficiently and cost-effectively. Two software packages are available for SINAMICS – Drive ES Basic and Drive ES PCS.

You can find further inbation about the Drive ES engineering system in the chapter Engineering tools.

Additional inbation about the Drive ES engineering system is available on the Internet at 
http://www.siemens.com/drive-es

Unless explicitly specified otherwise, the following technical specifications are valid for all the following components of the SINAMICS G120 standard inverters.

General technical specifications
Mechanical ambient conditions
Long-term storage acc. to EN 60721‑3‑1
Inverters and components, frame sizes FSA to FSF 1)	Class 1M2
Inverters and components, frame size FSGX 2)	Class 1M2
Transport acc. to EN 60721‑3‑2
Inverters and components, frame sizes FSA to FSF2)	Class 2M3
Inverters and components, frame size FSGX 2)	Class 2M2
Operation acc. to EN 60721‑3‑3
Inverters and components, frame sizes FSA to FSF	Class 3M1
Vibration test	Test Fc (sinusoidal) according to EN 60068‑2‑6 Deflection: 0.075 mm at 10 ... 57 Hz Acceleration: 10 m/s2 (1 × g) at 57 ... 150 Hz 10 frequency cycles per axis
Shock test	Test Ea (semi-sinusoidal) according to EN 60068‑2‑27 Acceleration: 49 m/s2 (5 × g) at 30 ms 3 shocks in all three axes in both directions
Inverters and components, frame size FSGX
Vibration test	Test Fc according to EN 60068‑2‑6 Deflection: 0.075 mm at 10...58 Hz Acceleration: 10 m/s2 (1 × g) at 58 ... 200 Hz
Shock test	Test Ea according to EN 60068‑2‑27 Acceleration: 98 m/s2 (10 × g) at 20 ms
Ambient conditions
Protection class acc. to EN 61800‑5‑1	Class I (with protective conductor system) and class III (PELV)
Touch protection acc. to EN 61800‑5‑1	For the intended purpose
Permissible ambient and coolant temperature (air) during operation for line-side power components and Power Modules
Low overload (LO)
PM230 IP20 and PM240‑2, frame sizes FSA ... FSC	-10 ... +40 °C (14 ... 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
PM240‑2, frame sizes FSD … FSF	-20 ... +40 °C (-4 ... +104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
PM230, frame sizes FSD … FSF, and PM250	0 ... 40 ℃ (32 ... 104 °F) without derating >40 ... 60 °C (>104 ... 140 °F) see derating characteristics
PM240 frame size FSGX	0 ... 40 °C (32 ... 104 °F) without derating >40 ... 55 °C (>104 ... 131 °F) see derating characteristics
High overload (HO)
PM230 IP20 and PM240‑2, frame sizes FSA ... FSC	-10 ... +50 °C (14 ... 122 °F) without derating >50 ... 60 °C (>104 ... 140 °F) see derating characteristics
PM240‑2, frame sizes FSD … FSF	-20 ... +50 °C (-4 ... +122 °F) without derating >50 ... 60 °C (>104 ... 140 °F) see derating characteristics
PM230, frame sizes FSD … FSF, and PM250	0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 °C (>122 ... 140 °F) see derating characteristics
PM240 frame size FSGX	0 ... 40 °C (32 ... 104 °F) without derating >40 ... 55 °C (>104 ... 131 °F) see derating characteristics
Permissible ambient and coolant temperature (air) during operation for Control Units and supplementary system components	With CU230P‑2 HVAC and CU230P‑2 DP: -10 ... +60 °C (14 ... 140 °F) With CU230P‑2 PN: -10 ... +55 °C (14 ... 131 °F) With CU240B‑2 and CU240E‑2 (without PN): -10 ... +55 °C (14 ... 131 °F) With CU240E‑2 PN and CU240E‑2 PN‑F:-10 ... +53 °C (14 ... 127.4 °F) With CU250S‑2: -10 ... +50 °C (14 ... 122 °F) With IOP/BOP‑2: 0 ... 50 °C (32 ... 122 °F) Derating of 3 K/1000 m (3281 ft) applies to Control Units as of an installation altitude of 1000 m (3281 ft) above sea level.
Climatic ambient conditions
Storage 2) acc. to EN 60721‑3‑1	Class 1K4 Temperature: -25 ... +55 °C (-13 ... +131 °F)
Transport 2) acc. to EN 60721‑3‑2	Class 2K4 Temperature -40 ... +70 °C (-40 ... +158 °F)
Operation acc. to EN 60721‑3‑3	Better than class 3K3 with regard to Temperature: -10 ... +40 °C (14 ... 104 °F) without derating >40 ... 60 °C (>32 ... 140 °F) see derating characteristics Relative humidity: 5 … 95 % (no condensation) Oil mist, salt mist, ice bation, condensation, dripping water, spraying water, splashing water and water jets are not permitted
Environmental class/harmful chemical substances
Storage 2) acc. to EN 60721‑3‑1	Class 1C2
Transport 2) acc. to EN 60721‑3‑2	Class 2C2
Operation acc. to EN 60721‑3‑3	Class 3C2 3) Class 3C3 for PM240‑2 Power Modules, frame sizes FSD to FSF with SIPLUS Control Unit 3)
Organic/biological influences
Storage 2) acc. to EN 60721‑3‑1	Class 1B1
Transport 2) acc. to EN 60721‑3‑2	Class 2B1
Operation acc. to EN 60721‑3‑3	Class 3B1
Degree of pollution acc. to EN 61800‑5‑1	2
Certification for fail-safe versions
Applies to Control Units of the CU240E‑2 and CU250S‑2 series. The values include Control Unit and Power Module. Note: The Safety Integrated Function Manual contains detailed inbation about the safety functions:https://support.industry.siemens.com/cs/document/109477367	The PM240‑2 Power Modules, frame sizes FSD to FSF additionally offer STO acc. to IEC 61508 SIL 3 and EN ISO 13489‑1 PL e and Category 3.
According to IEC 61508	SIL 2
According to EN ISO 13849‑1	PL d and Category 3
Standards
Compliance with standards	UL 4), cUL 4), CE, C-Tick (RCM), SEMI F47 Additionally for PM240‑2 frame sizes FSD ... FSF: KCC, WEEE, RoHS, EAC
CE marking	According to Low-Voltage Directive 2006/95/EC
EMC Directive acc. to EN 61800‑3
Interference immunity
PM230 Power Modules, with degree of protection IP20 PM240‑2 Power Modules PM240 Power Modules PM250 Power Modules	The Power Modules are tested according to the interference immunity requirements for environments according to Category C3
Interference emissions
PM230 Power Modules with degree of protection IP20
Frame sizes FSA to FSF without integrated line filter	5)
Frame sizes FSA to FSF with integrated line filter class A	Observance of the limit values according to Category C3 and C2 6)
Frame sizes FSA to FSF without integrated line filter with optional line filter class B	Observance of the limit values for low-frequency harmonic effects and conducted interferences according to Category C1 for field-conducted interference emissions according to Category C2 6)
PM240‑2 Power Modules
Frame sizes FSA to FSF without integrated line filter	5)
Frame sizes FSA to FSC with integrated line filter class A	Observance of the limit values according to Category C3 for conducted interferences and field-conducted interference emissions according to Category C2 6)
Frame sizes FSD to FSF with integrated line filter class A	Observance of the limit values according to Category C3 and C2 6)
Frame sizes FSA to FSC without integrated line filter with optional line filter class B	Observance of the limit values for conducted interferences according to Category C1 for field-conducted interference emissions according to Category C2 6)
PM240 Power Modules
Frame size FSGX without integrated line filter	5)
Frame size FSGX without integrated line filter with optional line filter class A	Observance of the limit values according to Category C3 for conducted interferences and field-conducted interference emissions according to Category C2 6)
PM250 Power Modules
Frame size FSC with integrated line filter class A	Observance of the limit values according to Category C3 and C2 6)
Frame size FSC with integrated line filter class A und optional line filter class B	Observance of the limit values for low-frequency harmonic effects and conducted interferences according to Category C1 for field-conducted interference emissions according to Category C2 6)
Frame sizes FSD to FSF without integrated line filter	5)
Frame sizes FSD to FSF with integrated line filter class A	Observance of the limit values according to Category C3 and C2 6)

¹⁾ In product packaging.

²⁾ In transport packaging.

³⁾ SIPLUS components for extreme requirements are available. Additional inbation is available on the Internet athttp://www.siemens.com/siplus-drives

⁴⁾ Applies to all PM230 Power Modules in degree of protection IP20 (cUL only for frame sizes FSA to FSC), PM240‑2, PM240 and PM250 Power Modules with integrated line filter class A.

⁵⁾ Non-filtered devices are designed for operation on IT systems or in conjunction with an RCD. The customer must provide suitable RI suppression equipment to ensure that these devices comply with the limits defined for Category C3 or C2.

⁶⁾ Max. permissible cable lengths see section Power Modules → Integration.

Note:

The EMC product standard EN 61800-3 does not apply directly to a frequency inverter but to a PDS (Power Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter. The frequency inverters on their own do not generally require identification according to the EMC Directive.

Compliance with standards

CE marking

The SINAMICS G120 inverters meet the requirements of the Low-Voltage Directive 2006/95/EC.

Low-Voltage Directive

The inverters comply with the following standards listed in the official journal of the EU:

• EN 60204
  Safety of machinery, electrical equipment of machines
• EN 61800-5-1
  Electrical power drive systems with variable speed – Part 5‑1: Requirements regarding safety – electrical, thermal, and energy requirements

UL listing

Inverter devices in UL category NMMS certified to UL and cUL, in compliance with UL508C. UL list numbers E121068 and E192450. This applies to all PM230 Power Modules, IP 20 degree of protection (cUL only for frame sizes FSA to FSC), PM240, PM240‑2 and PM250 Power Modules with integrated line filter class A.

For use in environments with pollution degree 2.

See also on the Internet at 
http://www.ul.com

Machinery Directive

The inverters are suitable for installation in machines. Compliance with the Machinery Directive 2006/42/EC requires a separate certificate of conbity. This must be provided by the plant construction company or the organization marketing the machine.

EMC directive

• EN 61800‑3
  Variable-speed electric drives
  Part 3: EMC product standard including specific test bs

The following inbation applies to SINAMICS G120 frequency inverters from Siemens AG:

• The EMC product standard EN 61800-3 does not apply directly to a frequency inverter but to a PDS (Power Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter.
• Frequency inverters are normally only supplied to experts for installation in machines or systems. A frequency inverter must, therefore, only be considered as a component which, on its own, is not subject to the EMC product standard EN 61800-3. The inverter's operating instructions, however, specifies the conditions regarding compliance with the product standard if the frequency inverter is expanded to become a PDS. For a PDS, the EMC Directive in the EU is complied with by observing the product standard EN 61800-3 for variable-speed electric drive systems. The frequency inverters on their own do not generally require identification according to the EMC Directive.
• Different categories C1 to C4 have been defined in accordance with the environment of the PDS at the operating b:
  • Category C1: Drive systems for rated voltages < 1000 V for use in the first environment
  • Category C2: Stationary drive systems not connected by means of a plug connector for rated voltages < 1000 V. When used in the first environment, the system must be installed and commissioned by personnel familiar with EMC requirements. A warning note is required.
  • Category C3: Drive systems for rated voltages < 1000 V for exclusive use in the second environment. A warning note is required.
  • Category C4: Drive systems for rated voltages ≥ 1000 V or for rated currents ≥ 400 A or for use in complex systems in the second environment. An EMC plan must be created.
• The EMC product standard EN 61800‑3 also defines limit values for conducted interference and radiated interference for the "second environment" (= industrial power supply systems that do not supply households). These limit values are below the limit values of filter class A acc. to EN 55011. Unfiltered inverters can be used in industrial environments as long as they are part of a system that contains line filters on the higher-level infeed side.
• With SINAMICS G120, Power Drive Systems (PDS) that fulfill the EMC product standard EN 61800-3 can be configured when observing the installation instructions in the product documentation.
• A differentiation must be made between the product standards for electrical drive systems (PDS) of the range of standards EN 61800 (of which Part 3 covers EMC topics) and the product standards for the devices/systems/machines, etc. This will probably not result in any changes in the practical use of frequency inverters. Since frequency inverters are always part of a PDS and these are part of a machine, the machine manufacturer must observe various standards depending on their type and environment (e.g. EN 61000‑3‑2 for line harmonics and EN 55011 for radio interference). The product standard for PDS on its own is, therefore, either insufficient or irrelevant.
• With respect to the compliance with limits for line supply harmonics, the EMC product standard EN 61800‑3 for PDS refers to compliance with the EN 61000‑3‑2 and EN 61000‑3‑12 standards.
• Regardless of the configuration with SINAMICS G120 and its components, the machine construction company (OEM) can also apply other measures to ensure that the machine complies with the EU EMC Directive. The EU EMC Directive is generally fulfilled when the relevant EMC product standards are observed. If they are not available, the generic standards (e.g. DIN EN 61000‑x‑x) can be used instead. It is important that the conducted and emitted interference at the line supply connection point and outside the machine remain below the relevant limit values. Any suitable technical measures can be applied to ensure this.

SEMI F47

SEMI F47 is an industry standard relating to the immunity to voltage dips. This includes the requirement that industrial equipment must be able to tolerate defined dips or drops of the line supply voltage. As a result, industrial equipment that fulfills this standard is more reliable and productive. In the SINAMICS G120 product family, the PM230, PM240, PM240‑2 and PM250 Power Modules fulfill the latest SEMI F47‑0706 standard. In the case of a voltage dip, defined in accordance with SEMI F47‑0607, these drives either continue to supply a defined output current, or using an automatic restart function, continue to operate as expected.