Picture can differ from actual product
| Connection | Connector, M16 |
|---|---|
| Resolution | ≤ 0.1 mV |
| Operating voltage | 20...28 V DC |
| For dynamic loop applications | No |
| Interface | Analog interface, voltage |
| Design | Series Profile |
| Approvals | CE |
| Degree of protection as per IEC 60529 | IP67 (with connector) |
|---|---|
| Protected against polarity reversal | Yes |
| Connection type | Connector |
|---|---|
| Output signal | 0…10 V and 10…0 V |
| Galvanic isolation | No |
| Interface | Analog |
| Ripple | 0.5 Vpp |
| Current consumption (at 24 V DC) | ≤ 150 mA |
| Inrush current | ≤ 3 A / 0.5 ms |
| Overvoltage protected | Yes |
| Voltage-proof (GND – housing) | 500 V DC |
| For dynamic loop applications | No |
| Interface | Analog interface, voltage |
| Error signal Ua rising | ≥ 11 V |
| Error signal Ua falling | ≤ -1 V |
| Operating voltage | 20...28 V DC |
| Connector type | M16 |
|---|---|
| Ambient temperature Ta min. | -40 °C |
| Ambient temperature Ta max. | 85 °C |
| Housing material | Anodized aluminum |
| Number of pins | 8 |
| Version | Type R |
| Mounting type | Mounting clamps |
| Nominal stroke | 50 mm |
| Resolution | ≤ 0.1 mV |
| Repeat accuracy | ≤ 0.1 mV |
| Sampling rate (length-depend.) | 1 kHz, standard |
| TK, typ. (at 50% of 500 mm) | ≤ 35 ppm/K |
| Storage temperature min. | -40 °C |
| Storage temperature max. | 100 °C |
| Relative humidity | < 90%, non-condensing |
| EN 60068-2-27 (shock) | 100 g / 6 ms |
| EN 60068-2-29 (cont. shock) | 100 g / 2 ms |
| EN 60068-2-6 (vibration) | 12 g, 10…2000 Hz |
| EN 60068-2-64 (noise) | 5 g, 10…2000 Hz |
| EN 55016-2-3 (emission) | Class A |
| EN 61000-4-2 (ESD) | Severity Level 3 |
| EN 61000-4-3 (RFI) | Severity Level 3 |
| EN 61000-4-4 (burst) | Severity Level 3 |
| EN 61000-4-5 (surge) | Severity Level 2 |
| EN 61000-4-6 (HF fields) | Severity Level 3 |
| EN 61000-4-8 (magnetic fields) | Severity Level 4 |
| Cable/connector out | Axial |
| Null point | 5 mm |
| Resolution | ≤ 0.1 mV |
