The ergonomically designed Leica DM1000 with adjustable features and easy-to-use controls adapts to every user to improve comfort and convenience while working at the microscope.
Featuring high-quality optical perbance, the Leica DM1000 is ideal for all clinical laboratory applications, in particular cytology, haematology, and pathology.
Its advanced capabilities, including fluorescence, make it well suited also for complex tasks.
Unique physical requirementsCan be configured to fit an individual’s unique physical requirements using a variety of ergonomic equipment, like the patented height adjustable focus knobs, tubes with variable tilting angle, ergonomic modules, and a coaxial drive with adjustable length which is exchangeable for right and left-handed users. |
Height-adjustable focus knobsReal symmetrical operation of stage and focus controls allows relaxed posture, and helps to prevent pains or even RSI after long working days. |
Objectives for your demandHigh class bives are available for each budget, from the HI PLAN series with outstanding flatness, contrast, and color correction to research class bives that meet even the highest expectations. Also available: series of brightness synchronized, and extra long working distance bives for easy marking in cytology without need to adjust the brightness when changing magnification. |
Easy lamp exchangeMany helpful features like the easy and fast lamp exchange thanks to the special drawer make work comfortable, and speed up workflow too. |
Compact designThe modular design enables to configure the microscope to the user’s requirements while maintaining a small footprint. |
奧林巴斯顯微鏡CX41/CX31/CX21現貨/BX43/53現貨
尼康顯微鏡E100現貨/E200現貨/體視顯微鏡SMZ445/745/800現貨
徠卡顯微鏡DM500現貨/DM750現貨/S6E/S6D/S8APO現貨
北京冠普佳科技有限公司
聯系人:李小兵(先生)銷售部經理
手機:13811719035
Q Q:79989278
網址:www.groupca.com.cn
用途
生物顯微鏡供醫療衛生單位、高等院校、研究所用于微生物、細胞、細菌、組織培養、
懸浮體、沉淀物等的觀察,可連續觀察細胞、細菌等在培養液中繁殖分裂的過程等。在細胞學、寄生蟲學、腫瘤學、免疫學、遺傳工程學、工業微生物學、植物學等領域中應用廣泛。顯微鏡的重要光學技術參數在鏡檢時,人們總是希望能清晰而明亮的理想圖象,這就需要顯微鏡的各項光學技術參數達到一定的標準,并且要求在使用時,必須根據鏡檢的目的和實際情況來協調各參數的關系。只有這樣,才能充分發揮顯微鏡應有的性能,得到滿意的鏡檢效果。 顯微鏡的光學技術參數包括:數值孔徑、分辨率、放大率、焦深、視場寬度、覆蓋差、工作距離等等。這些參數并不都是越高越好,它們之間是相互聯系又相互制約的,在使用時,應根據鏡檢的目的和實際情況來協調參數間的關系,但應以保證分辨率為準。
▋注意:本產品都是進口產品,收到貨后在快遞員協助下,拆開包裝檢查產品的完整性。
基本使用方法
顯微鏡的使用
利用自然光源鏡檢時,最好用朝北的光源,不宜3采用直射陽光;利用人工光源時,宜用日光燈的光源。
鏡檢時身體要正對實習臺,采取端正的姿態,兩眼自然張開,左眼觀察標本,右眼觀察記錄及繪圖,同時左手調節焦距,使物象清晰并移動標本視野。右手記錄、繪圖。
鏡檢時載物臺不可傾斜,因為當在五套載物臺傾斜時,液體或油易流出,