興安網架四孔橡膠支座多少錢-工控行業信息網(chinagkong.com)-工控行業門戶網站

產品簡介

興安網架四孔橡膠支座多少錢

產品價格：￥

上架日期：2017-09-26 09:43:28

產地：衡水

發貨地：衡水

供應數量：不限

最少起訂：1米

瀏覽量：148

點擊詢價 QQ洽談

資料下載：暫無資料下載

其他下載：暫無相關下載

詳細說明

興安網架四孔橡膠支座多少錢

網架支座是依據中華人民共和國交通行業標準《球形支座技術條件（GB/T17955-2009）及建筑抗震設計規范（GB50011-2001）鋼結構設計規范（GB50017-2003），經詳細的靜力學、動力學分析研制而成的新型抗震減振鋼支座。抗震減振支座結構更加合理，性能更加可靠，使用壽命更長。

Rack bearing is based on technical support conditions of People's Republic of China traffic industry standard "spherical (GB/T17955-2009) and the code for seismic design of buildings (GB50011-2001) code for design of steel structures (GB50017-2003), the static and dynamic analysis model of seismic vibration damping steel bearing rotogravuer. The seismic damping bearing structure is more reasonable, the perbance is more reliable, and the service life is longer.
網架支座（又名鋼結構支座）分為四個類型：GKQZ型鋼結構抗震鋼球支座、GJQZ型鋼結構減震鋼球支座、GKGZ型鋼結構抗震球型鋼支座、GJGZ型鋼結構減震球型鋼支座。
Rack bearing (aka steel bearing) is divided into four types: GKQZ type steel structure seismic steel ball bearing, ball bearing type GJQZ damping steel structure and GKGZ type seismic steel structure steel ball bearings, GJGZ type damping steel structure steel ball bearing.
該支座包括固定支座（代碼為GD）、單向支座（代號為DX）、雙向支座（代號為SX）三種型式，22個等級，其水平承載力、豎直方向拔力及支座的整體強度均比普通支座有大幅度提高。該系列支座采用彈性減振元件，當水平力大到一定程度后，減振彈簧開始發生彈性變形實現緩沖作用。當結構發生轉角時，球芯產生轉動，釋放上部結構產生的轉矩。地震時，剛性抗震措施和柔性減振措施同時發生作用，以抵御巨大的地震輸入能量，這樣既能保證橋梁上、下結構合理相對位移，減小地震力的放大系數，又使結構保持統一性。該支座可抵御8-11度地震，對高烈度地震區尤其直下型地震區的工程結構有良好的抗震減振作用。
The bearing comprises a fixed support (code GD), one-way bearings (codenamed DX), bidirectional support (codenamed SX) three types, 22 grades, bearing capacity, the level of the overall strength of vertical pulling force and bearing are better than ordinary bearing has greatly improved. The series of supports adopt elastic damping element. When the horizontal force is large to a certain extent, the damping spring begins to deb elastically to achieve the buffering effect. When the structure rotates, the ball core rotates to release the torque generated by the upper structure. When the earthquake, the rigid and flexible measures to reduce seismic measures happen at the same time, in order to resist the earthquake b energy is huge, so as to ensure the bridge, reasonable structure displacement amplification coefficient decreases with the force of the earthquake, and the structure of unity. The support can withstand 8-11 degree earthquake, and has good seismic and vibration reduction effect on the engineering structure in high intensity earthquake area, especially in the lower earthquake zone.

鋼結構支座的主要技術性能

興安網架四孔橡膠支座多少錢

Main technical perbance of steel structure support
1、可承受豎向載荷；
1 、 can withstand vertical load;
2、具有抗豎向拉力的性能，保證豎向地震時上下結構不脫節；
2, the perbance of resistance to vertical tensile, vertical and vertical structures to ensure that the earthquake is not out of line;
3、具有抗水平力的性能，保證水平地震時結構不脫落；
3, with the ability to resist horizontal force, to ensure that the structure does not fall in the horizontal earthquake;
4、可適應徑向、環向的位移要求；
4. It can meet the requirements of radial and circumferential displacement;
5、可適應任意方向的轉角要求；
5. It can be used in any direction;
6、減震支座具有良好的減震性能；
6 、 shock absorption bearing has good shock absorption perbance;
7、支座通過球面?zhèn)髁Γ怀霈F(xiàn)力的縮頸現象，作用在上、下結構的反力比較均勻；
7, support through spherical transmission, no force necking phenomenon, the role in the upper and lower structure of the reb force is more unib;
8、支座不用橡膠承壓，不存在橡膠老化對支座的影響，使用壽命長。
8, bearings without rubber pressure, there is no rubber aging on the impact of bearings, long service life.
鋼結構支座技術參數
Technical beters of steel structure support
1、支座豎向承載力分為300KN、500KN、1000KN、1500KN、2000KN、2500KN、3000KN、4000KN、5000KN、6000KN、7000KN、8000KN、9000KN、10000KN十四個級別
1, the vertical bearing capacity of the bearing is divided into 300KN, 500KN, 1000KN, 1500KN, 2000KN, 2500KN, 3000KN, 4000KN, 5000KN, 6000KN,, 7000KN, 8000KN, 9000KN, 10000KN fourteen levels
2、支座的抗水平力為豎向承載力的20%
2. The horizontal resistance of the support is 20% of the vertical bearing capacity
3、支座抗豎向拉力：GKQZ型、GJQZ型抗豎向拉力為豎向承載力的20%；GKGZ型、GJGZ型抗豎向拉力為豎向承載力的30%
3, support vertical tensile force: GKQZ and GJQZ, vertical tensile resistance for the vertical bearing capacity of 20%; GKGZ and GJGZ type vertical tensile resistance is 30% of the vertical bearing capacity
4、設計轉角為0.08rad（可根據用戶要求另行設計）
4, the design angle is 0.08rad (can be designed separaby according to the user's requirement)
5、支座的徑向位移量±20mm-±50mm，環向位移量±60mm-±100mm；

5. The radial displacement of the support is + 20mm- + 50mm, and the displacement of the ring is + 60mm- + 100mm;

興安網架四孔橡膠支座多少錢

6、支座滑動摩擦系數μ≤0.03（-25℃-+60℃）；
6, bearing sliding friction coefficient is less than 0.03 (-25 -+60 OC);
7、支座轉動摩擦系數μ=0.05-0.1（GKQZ型、GJQZ型）μ≤0.03（GKGZ型、GJGZ型）
7, bearing rotating friction coefficient of =0.05-0.1 (GKQZ and GJQZ) was less than 0.03 (GKGZ and GJGZ)
鋼結構支座特點
Characteristics of steel structure support
①抗震球型鋼支座可萬向轉動、萬向承載，能很好地滿足上部結構各種荷載所產生的反力的傳遞、轉動、移動要求，保證反力合力集中、明確、安全可靠。
The earthquake resistant steel ball bearing can rotate, universal universal bearing, can satisfy the various loads of upper structure generated by the force transmission, rotating and moving requirements, to ensure that anti force concentrated and b, safe and reliable.
②抗震球型鋼支座可承受拉、壓、剪（橫向）力，在巨大的隨機地震力作用下，只要上、下結構本身不破壞，就不會發生落梁、落架等災難性后果，故特別適用于高烈度地震區的設防，具備能抗地震烈度9度的能力。
The earthquake resistant steel ball bearing can withstand tension, compression and shear (transverse) force in the random seismic force huge, as long as the upper and lower structure is not destroyed, will not happen, fall off the beam frame and other disastrous consequences, which is especially suitable for the area with high seismic intensity have the ability to fortify, 9 degrees of anti earthquake intensity.
③抗震球型鋼支座的靜剛度大，在列車及大型汽車巨大自重及慣性力作用力下，支座僅產生極小變形，能可靠地保證汽車、列車高速運行時的平順性。
The static stiffness of the shock resistant spherical steel bearing is very large. Under the enormous self weight and inertial force of the train and large automobile, the bearing only produces minimal debation, which can reliably guarantee the ride comfort of the car and train at high speed.
④抗震球型鋼支座通過球面?zhèn)髁?，受力面積大，并采用多種材料的優化組合，其體積和高度均大大減少，重量輕，便于安裝，并與同承載力的鋼支座相比造價較低。
The seismic type of steel ball bearing by the spherical force, the force area, and the optimal combination of various materials, the volume and height were significantly reduced, light weight, convenient installation, and steel bearing capacity compared with low cost.
⑤抗震球型鋼支座適用溫度范圍大(-40℃～+70℃)，耐久性能好，不采用橡膠承壓，不存在橡膠老化對支座轉動性能的影響。
The anti shock ball shaped steel support is suitable for a wide temperature range (-40 to +70 DEG C), and has good durability, and does not use rubber to bear pressure. There is no influence of rubber aging on the rotation perbance of the bearing.
鋼結構支座適用范圍
Applicable range of steel structure support
抗震球型鋼支座適用于寬橋、曲線橋、斜拉橋、坡道橋、大跨空間結構等工程，尤其在地震高烈度區更為適用。
Anti seismic spherical steel supports are suitable for wide bridges, Qu Xianqiao and cable-stayed bridges, ramp bridges and long-span spatial structures, especially in high earthquake intensity areas.
鋼結構支座選用時應注意的事項
Matters needing attention in selection of steel structure support
1、選用支座時應注意承載力的大小、豎向拉力的大小、水平力的大小，并注意位移量和轉角，對于減震支座還應注意水平彈性剛度。
1, the selection of bearings, should pay attention to the size of the bearing capacity, vertical tensile force, the size of horizontal force, and pay attention to displacement and corner, for the shock absorber should also pay attention to the level of elastic stiffness.
2、選用支座時應注意支座的類型，即雙向活動型、單向活動型、固定型。
2, the use of bearings should pay attention to the type of bearings, namely, two-way, one-way, movable type, fixed type.
3、減震支座的約束方向都給以位移和剛度，是為了工程減震的需要。

3 、 the restraint direction of the shock absorbing bearing is both displacement and rigidity, which is the need of Engineering shock absorption.

興安網架四孔橡膠支座多少錢

在線詢盤/留言

*您的姓名：

*聯系手機：

固定電話：

*聯系郵箱：

所在單位：

*需求數量：

*咨詢內容：

您要求給廠家提供：

免責聲明：以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，本網對此不承擔任何保證責任。我們原則上建議您選擇本網高級會員或VIP會員。

企業信息

河北瑞博橡塑制品有限公司

會員級別：

------------ 聯系方式 ------------

聯系人：王偉（先生）

聯系電話：0318-2110875

聯系手機：13166570832

傳真號碼：0318-2110875

企業郵箱：3407742055@QQ.COM

網址：hsribo.jdzj.com

郵編：53500

企業網站

進入商鋪

欧美a级黄片,中文字幕精品久久久久人妻红杏1,福利久久,亚洲AV无码片一区二区三区_