Main features:
主要特點
?
??Integrated the control system and furnace chamber?in one.
集控制系統與爐膛為一體
?
??Chamber linied with vacuum bing high purity alumina poly light material, adopt resistance wire as the heating element..
爐膛使用真空成型高純氧化鋁聚輕材料，采用電阻絲為加熱元件。
?
??A special equipment developed for the rapid sintering, melting, and analysis of bls, flying bls and other compound materials in atmosphere or vacuum by universities, scientific research institutes and industrial and mining enterprises.
專為高等院校、科研所及工礦企業對金屬，飛金屬及其他化合物料在氣氛或真空狀態下進行快速燒結、融化、分析而研制的專用設備。
?
Technical Parameters
技術參數
|
Power 輸入電源 |
·?Power rated:4KW ·?額定功率：4KW |
|
Voltage 電壓 |
·?Voltage rated:??AC220V 50/60HZ ·?額定電壓：?AC220V 50/60HZ |
|
Working Temperature 工作溫度 |
·?Max. Temperature: 1200?°C ( 1 hr) 最高溫度：1200℃ (1小時) ·?Continuous working temperature:?≤1100℃ 持續工作溫度：≤1100℃ ·?Recommended heating Rate:?≤10°C /min 推薦升溫速率：≤10℃/分 |
|
控溫方式 |
·?PID automatic control and?auto-tune function. ???模糊PID控制和自整定調節 ·?30 programmable segments for precise thermal processing. ???智能化30段可編程控制 ·?Built-in protection for the over-heated and broken thermocouple.? 超溫和斷偶報警功能 |
|
Heating Elements 加熱元件 |
·?Resistance wire, Fe-Cr-Al Alloy doped by Mo ·?電阻絲（摻鉬鐵鉻鋁合金） |
|
Temperature Accuracy 控溫精度 |
+/- 1?°C |
|
Chamber size 爐膛尺寸 |
·?Φ240*210mm ? |
|
Dimensions 尺寸 |
·?Furnace size:?590*380*500mm(L*W*H without tube & flange) 爐子尺寸：510*430*590mm(長*寬*高?) |
|
Net Weight 凈重 |
35kg |
|
Warranty 質保 |
One year limited warranty with lifetime support ?(Such consumable parts are NOT?supported?by the warranty) 一年質保終身支持（消耗品不在質保范圍內） |
|
Warning 注意事項 |
·?Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with?alumina coating. ·?在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
|
Compliance 認證 |
·?CE Certified CE認證 ·?The furnace is ready to?pass TUV?(UL61010) or CSA?certification at extra cost. 可付費進行TUV(UL61010)或CSA認證 |
|
|
