數字式輸出系列----
Digital Interfaces seriesRXM22系列：迷你型電磁編碼器帶非接觸顯示傳感器，無需內置運動部件，可為儀器儀表和自控設備提供經濟的解決方案；
RXM 22 series: Electromagnetic mini-encoders with contactless read-out sensors and without internal moving parts, for economical solutions within instrumentation and automation equipment。K58系列：絕對型編碼器配置高精度光敏元件，分別率可達
16位/圈，提供并行輸出、同步串行輸出和
PROFIBUS總線輸出；
K58 series: Absolute encoders with high-tech optical sensor, with resolutions up to 16 Bits per 360°.They are available with parallel, serial (SSI) and PROFIBUS interfaces.CBE系列：
13位單圈編碼器，可提供提供并行輸出、同步串行輸出，多種法蘭形式，軸負載可達
250N；
CBE series: Single turn encoders featuring 13 Bits resolution (8192 bs per 360° and parallel or serial outputs. Items with 3600 bs (1/10 resolution) are also available.
CRE 系列: 多圈編碼器，分辨率13位/圈；（可選8192脈沖/圈，3600脈沖/圈，并行或串行輸出） 為連接軸可選配多種法蘭，軸負載可達250N。
CRE series: Multi turn encoders featuring 13 Bits resolutions (8192 bs per 360° and measuring range of 4096 revolutions with parallel or serial outputs. Various flange configurations for shaft loads up to 250 N are available.
CRS/CRL系列：
TWK公司經典的
INTERBUS總線輸出編碼器，總輸出量可達
25位，強大靈活的可編程設計滿足個性化需要；
CRS/CRL series: The classical InterBus encoders with a total capacity of 25 Bits, programmable via the bus network.
CRD系列：高能量的DP-Slave Class 2 PROFIBUS編碼器配置后端連接帽或側處旋轉接頭，與其他C系列編碼器一樣，其軸向負載達250N；
CRD series: The robust DP-Slave Class 2 PROFIBUS encoders either with rear connecting cap or with lateral round connector. Alike all the C-series encoders they carry axial and radial shaft loads up to 250 N.
CRD/W+H系列：符合DESINA安裝系統要求的絕對式編碼器，可選擇光纖或銅纜進行數據傳輸，提供PROFIBUS 輸出界面；
CRD/W + H series: Absolute encoders for use within the DESINA installation system, featuring either fiber optical or copper data transmission lines and Han-Brid connectors, with PROFIBUS interfaces.
CRN系列：支持CAN "pur", CANopen or DeviceNet三種CAN總線輸出及多種布線裝置；
CRN series: Three different versions of CAN encoders with CAN "pur", CANopen or DeviceNet interfaces and various connection layouts.
CRF/CRP系列：支持PC和手持式計算機的多圈可編程編碼器，多種輸出界面以滿足各種特殊應用需求；
CRF and CRP series: Programmable multiturn encoders for configuration either by PC or handhold programmer. Many output features can be chosen to fit specific application requirements. S系列：在
C系列的基礎上增加不銹鋼外殼以滿足惡劣工況的要求，如海洋設備；化工設備和食品加工行業等；
S-series: The C-Series encoders can be supplied with stainless steel housings for use within aggressive ambiance (harbour and naval equipment, chemical plants, food industry etc.).
GIM5000系列：電磁式的增量型編碼器，配置霍爾傳感器提供每圈700個到5320個計數單位；
GIM 5000 series: Electro-magnetic incremental encoders with Hall sensors are available with 700 different resolutions up to 5320 counts per revolution.
LC57系列：絕對式線性位置傳感器，行程可達1500mm,有格雷碼、自然二進制碼和BCD等編碼器方式可選，配備外置永磁執行器；
LC 57 series: Absolute coded linear displacement transducers for strokes up to 1500 mm (Gray, natural binary or BCD) with external permanent magnet actuator.
MP/MS系列：MAGNOSENS磁阻線性位移傳感器提供SSI、PROFIBUS-DP和CANOPEN總線輸出；
MP and MS series: MAGNOSENS magnetorestrictive linear displacement transducers with, SSI, Profibus-DP or CANopen interfaces.
SWF、SWG及SWH系列：強固型電纜式位移及角度轉換器，測量范圍達60mm,適用于增量型或絕對型編碼器；
SWF, SWG, SWH series: Very robust cable type displacement/angle converters beasuring ranges up to 60 m and for fitting absolute and incremental encoders.
ZMA系列：齒帶式位移/角度轉換器適用于增量型及絕對型編碼器，可將直線運動轉換為旋轉運動；
ZWA series: Toothed-belt-type displacement/angle converter for fitting to absolute or incremental encoders and for converting a translational movement into a rotary movement.
模擬量輸出系列-----Analogue Interfaces series
RAX系列：電磁式單圈傳感器，直徑為36mm，可提供0-10VDC及0（4）-20mA輸出；
RAX 36 series: Electro-magnetic single turn transducers featuring 36 mm diameter and output signals of 0 to 10 VDC or 0(4) to 20 mA.
KDS/KDK 580系列：直徑為58mm的電磁式單圈傳感器，可提供0-10VDC及0（4）-20mA輸出；
KDS/KDK 580 series: Electro-optical single turn transducers featuring 58 mm diameter and output signals of 0 to 10 VDC or 0(4) to 20 mA.
DAB/DAF系列：旋轉式光電傳感器，可提供1-4096的分辨率， 輸出為0-10VDC及0（4）-20mA；
DAB/DAF series: Electro-optical rotary transducers for featuring ranges from 1 to 4096 revolutions and with output signals 0 to 10 VDC or 0(4) to 20 mA.
IW10/101 系列：微型感應式傳感器，量程達15mm,并附外部勵磁模塊；
IW 10/101 series: Miniature inductive transducers and gauges for ranges up to 15 mm and for excitation by external modules
IW150 系列：校準感應式傳感器，量程達15mm，精度為0.25%或0.5%，無限分辨率，無磁滯，可支持彈簧復位連接或球窩接頭；
IW 150 series: Calibrated inductive transducers with integral electronics and with ranges up to 15 mm. They can be fitted either with spring returns or with ball joints.
IW120系列：感應式線性傳感器，量程最大可達200 mm，外部電路勵磁，可支持彈簧復位連接或球窩接頭；
IW 120 series: Inductive linear transducers for strokes up to 200 mm and for excitation be external electronics. They can be fitted either with spring returns or with ball joints.
IWM12/300系列：感應式傳感器配置耐壓外殼和外部螺紋支架，IP66防護；
IWM 12/300 series: Inductive transducers with pressure proof housings and external mounting threads, either with integral calibrated electronics or for external excitation.
IW250/260系列：行程可達360mm的感應式傳感器，可提供0-10VDC及0（4）-20mA輸出，可配置彈簧復位連接、球窩接頭或防護導管；
IW 250/260 series: Inductive transducers for ranges up to 360 mm and with calibrated output signals of 0 to 10 VDC or 0 (4) to 20 mA. Options are spring returns, ball joints and/or protective guide tubes.
OA/OD/UN系列：可靈活配置振蕩器、解調器和放大器的感應換能器，可以分散供應或PC卡集成；
OA/OD/UN series: Oscillator, demodulator, amplifies modules of different configuration for the excitation of inductive transducers. They can be supplied either as separate items or on PC card.
RP 13/RH33 系列：電位式線性傳感器配置高壽命導電塑料，能適應苛刻工況，測量行程可達1000mm;
RP 13/RH 33 series: Potentiometric linear transducers with long life conductive plastic resistive elements, for measuring strokes up to 1000 mm.
PMR系列：經濟型旋轉電位計適用于汽車電子等領域，防水、耐高溫、防油及防凍性能較高；
PMR series: : Low cost rotary potentiometers for automotive and similar application, withstanding water, fuel, oil and antifreeze agents.
